EventTimerEventTimer.io

Free Church Timer for Sermons and Services

Keep every sermon and service on time with a large, easy to read countdown. Put it on a confidence monitor, a platform screen, or the sound booth display, free, with nothing to install.

No signup  ·  No download  ·  Works on every device

Live Demo

29:58

This is the real timer engine

Millisecond precision·Works on all devices·Fullscreen display·Instant start

Sermon Timer for Preachers and Teaching

A national study of roughly 50,000 online sermons found the median length in the United States is about 37 minutes, and that number swings widely by tradition, close to 14 minutes for a Catholic homily, around 25 for a mainline Protestant message, near 39 for an evangelical sermon, and about 54 in historically black Protestant churches. Whatever your tradition, a visible countdown helps a preacher land the message and finish well. EventTimer shows large, unambiguous digits on a confidence monitor at the front of the room, so the person speaking always knows how much time is left without glancing at a wristwatch. Color coded warnings turn yellow as the close approaches and red in the final minute, a gentle cue to bring it home. Set the length once, save it as a bookmark, and reuse it every week.

  • Large digits for a platform confidence monitor
  • Color coded warnings for the final minutes
  • Silent by default, no chimes mid message
  • Save your usual sermon length as a preset
30:00
30-minute default

Order of Service and Run of Show

Most services run between 60 and 90 minutes, and every element competes for that window: a welcome, a worship set of three or four songs, scripture reading, announcements, the offering, communion, the sermon, and a closing prayer. When any one piece drifts long, the whole service runs over and the next gathering starts late. Build your order of service in the Event Manager, give each segment its own timer, and move through the run of show without losing the plot. Your worship leader, tech team, and preaching pastor all work from the same plan. It is a calm, shared way to protect the flow of the morning.

  • Multiple timers for each service segment
  • Plan the full run of show in advance
  • Countdown, count up, and clock modes
  • Works on any laptop, tablet, or smart TV
30:00
30-minute default

Confidence Monitor and Sound Booth Display

The person on the platform should see the clock, and the congregation should not. EventTimer separates the two with a controller link and a viewer link, so your media team can run the timer from the sound booth while a clean fullscreen countdown appears on the confidence monitor. Start, pause, or add a couple of minutes from the back of the room, and the display on stage updates in real time. Nobody has to wave a card or flash the lights. It is the same shared timing approach used by conferences and broadcast teams, available free in any browser.

  • Separate controller and viewer links
  • Add or trim time from the sound booth
  • Real time sync across every screen
  • No proprietary hardware or licenses
30:00
30-minute default

Get started

Three steps, no signup

1

Open the timer

Visit eventtimer.io. The timer loads instantly in your browser, on any device.

2

Set your duration

Type any duration or choose a preset. Switch between countdown, count-up, or clock mode.

3

Go fullscreen and start

Press F for fullscreen, Space to start. Share the link if your team needs to see it.

Common questions

Is this church timer free to use every week?

Yes. EventTimer is completely free with no signup and no limits. Use it for every service, rehearsal, and midweek gathering at no cost.

Can the preacher see the countdown without the congregation seeing it?

Yes. Create a shared timer, put the viewer link on a confidence monitor facing the platform, and control it from the sound booth with the controller link. The congregation never sees the clock.

Can I add time discreetly if the message runs long?

Yes. From the controller screen you can pause, add minutes, or reset, and the confidence monitor updates instantly without any sound or interruption.

Does it make noise during the service?

No. The timer is silent by default so nothing beeps mid sermon. An optional chime is available for rehearsals if you want it.

Can I plan the whole order of service?

Yes. Use the Event Manager to create a timer for the welcome, worship set, scripture, sermon, and closing, then step through them in order on the day.

Will it work on our smart TV or projector?

Yes. Open EventTimer in the browser on any device connected to your screen, set the time, and press F for fullscreen. The digits scale to fill the display.

Explore more

Related timers and resources

Stop searching for the right timer. This one works.

Try it now

Free forever  ·  No signup required